I then screw on a short length of 1/2" PVC pipe I threaded when I drain, I get all the water away from me and the camper.
C
0
Hot water drain mod
Started by compulynx, Jul 11 2009 08:52 PM
2 replies to this topic
#1
-
- Members
-
- 135 posts
Mr Adventure
- Gender:Male
- Location:Thomasville, Georgia
Posted 11 July 2009 - 08:52 PM
Here is another mod I did. I was tired of removing the plug to drain the heater. It dumped water all over me and the burner of the heater. I did a little mod by using a brass 1/2" nipple and a 1/2" ball valve to fix the problem. I had to a little mod to the handle. You also have to remove and replace the burner, but that is only 3 screws.
I then screw on a short length of 1/2" PVC pipe I threaded when I drain, I get all the water away from me and the camper.
C
I then screw on a short length of 1/2" PVC pipe I threaded when I drain, I get all the water away from me and the camper.
C
#2
-
- Admin
-
- 1,177 posts
Admin & Patron
- Gender:Male
- Location:Alabama
- Interests:Camping, what else is there.
Posted 11 July 2009 - 09:08 PM
I like that. Tired of getting water everywhere but on the ground. Looks like your Low Points drain caps are laying in there also.
Leon
Leon
#3
-
- Moderator
-
- 284 posts
Forum Policeman
- Gender:Male
- Location:NC
- Interests:Anything that won't get me fired, sued, or community service..............
Posted 12 July 2009 - 08:01 AM
I would love to do this mod. However, my plug has an anode attached to it instead of just a drain plug. Nice job!
Mike
Mike
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
